 |
產品型號：-
產品代碼：009
產品價格：面議
產品編碼：009
計量單位：套
折 扣 率： 0
最后更新：2017-08-10
關 注 度：6748
生產企業：北京環中睿馳科技有限公司
|
|
|
 與企業聯系時請告知該信息來自教育裝備網！ |
|
|
產品詳細介紹MicroShield®是一款輻射劑量計算軟件，它廣泛應用于屏蔽體設計與屏蔽外參考點劑量率計算等方面。
該軟件有16種源項模型并自帶一個含12種屏蔽材料的材料庫以及一個含大量放射性核素的核素庫，
用戶還可以根據工程需要自行添加屏蔽材料，這些功能使用戶在建模時有更廣泛的選擇范圍。
MicroShield®除了重視建模、核素參量輸入等功能外，其最終結果是以Microsoft Office®方式輸出，方便用戶對計算結果進行后續應用。
【英文介紹】
MicroShield® is a comprehensive photon/gamma ray shielding and dose assessment program that is widely used for designing shields,
estimating source strength from radiation measurements, minimizing exposure to people, and teaching shielding principles.
MicroShield® is useful to health physicists, waste managers, design engineers,
and radiological engineers and only requires a basic knowledge of radiation and shielding principles.
MicroShield® is fully interactive and utilizes extensive input error checking.
Integrated tools provide graphing of results, material and source file creation, source inference with decay (dose-to-Ci calculations accounting for decay and daughter buildup),
projection of exposure rate versus time as a result of decay, access to material and nuclide data, and decay heat calculations.
MicroShield® Version 10 includes the addition of the International Commission on Radiological
Protection (ICRP) Publication 116 absorbed dose rates as well as:
· Inclusion of the historical ANSI/ANS-6.1.1-1977 gamma dose conversion factors
· Microsoft Windows® 8 compatibility as well as Windows 7, Vista® and XP®
· Ability to export results using any version Microsoft Office®
· Improved French and German versions of the main software interface
· Customized Reports
MICROSHIELD’S® FEATURES INCLUDE:
· Full Microsoft Windows® 8/8.1 (32 bit and 64 bit), Windows® 7 (32 bit and 64 bit),
Vista® and XP®compatibility.
· Ability to export results into Microsoft Office® applications.
· Ability to utilize international numerical formats (decimal commas, etc.).
· Current industry standard dose conversion factors including ICRP-116, ICRP-74, ICRP-51 as well as ANSI/ANS-6.1.1.
· Sixteen geometries that accommodate offset dose points and as many as ten standard
shields plus source self-shielding and cylinder cladding.
· The geometry display for entry is re-scaled as dimensions are entered.
Dimensional data are accepted in meters, centimeters, feet, or inches.
· Library data (radionuclides, attenuation, buildup, and dose conversion) reflect
standard data from industry standard radiation libraries ICRP-38 and ICRP-107 as well as
ANSI/ANS standards and RSICC publications.
· Buildup and uncollided results are both automatically and simultaneously calculated.
· Sources may be created and saved and moved among cases
(either as nuclides or energies) and as concentrations or totals.
Several photon grouping methods are provided including custom (user defined) grouping methods.
·
Source decay can be calculated with daughter products generated using the same algorithms as found in the RadDecay® software
GEOMETRY – SOURCE CONFIGURATIONS INCLUDED:
· Point
· Line
· Disk
· Rectangular Area – Vertical
· Rectangular Area – Horizontal
· Sphere
· Cylinder Volume – Side Shields
· Cylinder Volume – End Shields
· Cylinder Surface – Internal Dose Point
· Cylinder Surface – External Dose Point
· Annular Cylinder – Internal Dose Point
· Annular Cylinder – External Dose Point
· Rectangular Volume
· Truncated Cone
· Infinite Plane
· Infinite Slab
MICROSHIELD 10 NEW FEATURES:
ICRP Publication 116
ICRP Publication 116 (Conversion Coefficients for Radiological Protection Quantities
for External Radiation Exposures,
Annals of ICRP Volume 40(2-5), 2010) provides fluence to dose conversion coefficients
for both effective dose and organ absorbed doses for various types of external exposures,
consistent with the 2007 Recommendations of the ICRP.
These coefficients were calculated using the official ICRP/ICRU computational
phantoms representing the Reference Adult Male and Reference Adult Female,
in conjunction with Monte Carlo codes simulating the transport of radiation within
the human body such as EGSnrc, FLUKA, GEANT4, MCNPX, and PHITS.
The incident radiations and energy ranges considered were external beams of mono-energetic photons of 10 keV to 10 GeV. For the simulations,
idealized whole-body irradiation geometries were considered.
These included unidirectional broad parallel beams along the antero-posterior, postero-anterior,
left lateral and right lateral axes,
and 360° rotational directions around the phantoms’ longitudinal axis.
Fully isotropic irradiation of the phantoms was also considered.
ANSI/ANS-6.1.1-1977: Neutron and Gamma-Ray Fluence-To-Dose Factors
MicroShield® is now includes the reference gamma dose conversion factors from ANSI/ANS-6.1.1-1977:
Neutron and Gamma-Ray Fluence-To-Dose Factors to support calculations for NUREG-1617, “Standard Review Plan for Transportation
Packages for Spent Nuclear Fuel”.
Complete Exporting of Results
You can now save all general results as a Microsoft Word®, Microsoft Excel®, HTML,
or text files. MicroShield® now supports any version of Microsoft Office®.
Results that are saved as any of the first three file types are formatted and color coded for easy readability.
Microsoft Windows® 8/8.1 Native Compatibility
MicroShield® is now fully compatible with the following operating systems:
Microsoft XP®, Microsoft Vista®, Microsoft Windows® 7 (32 bit and 64 bit), and Microsoft Windows® 8/8.1 (32 bit and 64 bit).
Improved Language Translations
The MicroShield® software is available in English, French, and German languages
with recent updates to the French and German language translations.
The majority of menus, captions, messages, and report results will display in the language of the installed version.
Enhanced Reports and Options
The user now has the option of having the Case Summary Report or Dose Equivalent Report as the default reporting style.
In addition, exposure dose and fluence rates as well as the ANSI/ANS-6.1.1-1977, ICRP-51, ICRP-74, and ICRP-116 results can now be customized on the Dose Equivalent Report.
Requirements:
· Microsoft Windows® 8.1/8/7/Vista/XP
· Microsoft® Internet Explorer® Version 7 and above
· For exporting results to Microsoft Excel® and Word®, Microsoft Office® is required.
|
|
| 會員級別：免費會員 |
| 加入時間：2017-07-31
|
|
|
